Tiamat | Jumbo D20
Tiamat | Jumbo D20
A single handmade, sharp-edged jumbo 30 mm D20 featuring five 3D printed and painted dragon heads bursting up through a hoard of gold and gems.
The last photo is a size comparison with my standard 21 mm D20.
Dragon head 3D models are from the following artists on Sketchfab: jimzorb, KinanArts, kayla fox, and Larry, used under Creative Commons Attribution.
About the Dice
About the Dice
All of my dice are molded, poured, polished, and inked by hand. The dice are made of durable epoxy resin, which can handle your rolls with ease.
Due to the handmade nature of the dice, every set is unique and there may be minor faults or flaws such as small bubbles, scratches, or mold marks - however, my general rule of thumb is that these should only be noticeable with close inspection.
There may be slight variations in color or pattern from the photos, since each set of dice is made individually.
Care Instructions
Care Instructions
Store out of direct sunlight. Our dice are made with premium anti-yellowing resins; however, even with the enhanced UV protection, all resins naturally yellow over time. Storing your dice away from direct light will help avoid premature yellowing.
Keep away from sources of heat. Temperatures over 100°F/40°C can cause resin to temporarily soften. If softening occurs, place your dice on a flat surface in a cool area until they return to their usual hardness. The resin is still completely skin-safe in this state.